Wholesale equipment from Poland: certification and timing through our Warsaw warehouse

3 November 2026

Equipment ordered from a supplier in Poland for a Russian customer usually travels through our consolidation warehouse in Warsaw, priced by pallet count rather than by the size of the truck. From 1 September 2026 a wider list of machinery needs a certificate of conformity rather than a self-issued declaration — here is what changed and how the delivery itself is organised.

In short

Wholesale equipment from Poland for your Russian customer normally goes through our consolidation warehouse in Warsaw: the lot joins a groupage shipment or travels as a dedicated truck, and the Warsaw–Moscow rate is set by the number of pallets in the order, not by how much of the trailer it fills.

Since 1 September 2026, the list of machinery that needs a full certificate of conformity under TR CU 010/2011, rather than a self-declared statement, has been extended to cover floor-based industrial trucks, electric forklifts and stackers, construction, road and municipal equipment, and industrial tractors.

Before you book collection, it is worth checking the HS code for the specific model and which conformity document it now needs — sorting that out before dispatch is considerably cheaper than discovering it at the border.

Certification: what changed on 1 September 2026

Technical regulation TR CU 010/2011 “On the safety of machinery and equipment” has applied for years, but the Eurasian Economic Commission Council approved amendments to it on 13 March 2026, most of which took effect on 1 September 2026.

For an extended list of equipment — floor-based, non-rail industrial trucks, electric forklifts and stackers, construction, road and municipal machinery, and industrial tractors — a certificate of conformity is now required instead of the declaration that could previously be issued by the importer itself.

Documents issued before the amendments took effect remain valid until 1 September 2031, so existing certification on a model already cleared is not affected retroactively — but any new lot of that equipment should be checked against the current list before it ships.

Consolidating the lot and getting it to Moscow

The equipment is collected from your premises in Poland and brought to our [consolidation warehouse in Warsaw](/usluga/consolidation-warsaw), where it is combined with other customers’ lots. A truck leaves roughly once a week, usually on a Friday or a Monday, and transit from Warsaw to Moscow runs 3–5 days, whether the lot travels as groupage or as a dedicated truck.

For a larger lot that already fills a meaningful part of a trailer, a dedicated truck Warsaw–Moscow can work out cheaper than groupage. Our [LDM calculator](/kalkulyator-ldm) works out the pallet count and volume for your specific order so you can compare both options before you book.

Warsaw → Moscow rate by pallet count

PalletsRate from
1 pallet€345
2 pallets€560
3 pallets€760
5 pallets€1,065
10 pallets€1,805
Dedicated truck€4,500

The rate depends on the total number of pallets in one customer’s order, not on the size of the truck; for a lot that fills a large part of a trailer, a dedicated truck can work out cheaper than groupage.

Sanctions screening comes first

We only handle goods that are not subject to EU, UK, Swiss or US sanctions. Before we quote, we check the HS code of every item and screen all parties to the deal; if a product or a party is restricted, we decline the order, whatever the route or the price.

How Tranzit3 helps

We check the HS code and confirm which conformity document your customer’s model now needs before the lot leaves your premises, so certification is sorted before dispatch rather than at the border.

We arrange collection to the Warsaw warehouse and onward delivery to Moscow as groupage or a dedicated truck. We work only with companies and sole traders, lots from 50 kg, and the minimum service fee is €200. Send us a request, call +7 800 101-60-59, or message us on Telegram, and we will work out the route and certification for your customer’s equipment.

Questions and answers

Which equipment now needs a certificate instead of a declaration?

Since 1 September 2026, floor-based industrial trucks, electric forklifts and stackers, construction, road and municipal machinery, and industrial tractors need a certificate of conformity under TR CU 010/2011.

Do certificates issued before the amendments still count?

Yes — documents issued before the amendments took effect remain valid until 1 September 2031.

How is the Warsaw–Moscow rate calculated?

By the total number of pallets in one customer’s order: from €345 for 1 pallet up to €1,805 for 10, or from €4,500 for a dedicated truck.

How long does delivery take from Warsaw?

3–5 days from Warsaw to Moscow, whether the lot travels as groupage or as a dedicated truck; the truck itself leaves roughly once a week, usually on a Friday or a Monday.

Related pages

More in this section

Request a quote

Reply within 2 business hours

Keywords
  • Equipment shipping from Poland
  • Poland to Russia wholesale equipment
  • Warsaw consolidation warehouse
  • TR CU 010/2011 certificate
  • Machinery certification Russia 2026
  • Forklift certificate EAEU
  • LDM calculator pallets